PosiTector® SHD Test Blocks – Shore D 46

PosiTector® SHD Test Blocks - Shore D 46 Test Blocks for checking the operation of durometers Verification Method: Verification is an accuracy check performed by the user on known reference standards. A successful verification requires the Gauge to read within the combined accuracy of the probe and the test blocks. Instrument operation may be verified with the included test block. Place the test block on a flat, hard surface and take three to five readings. The measurement points should be at least 6 mm (0.24”) apart. If the average of those readings is outside the combined accuracy of the test block and gauge, the gauge may require service