Our model T01-700009 is a paint inspection gauge which is suitable for use wherever conventional electro-magnetic measuring techniques are ineffective, namely for coatings on wood, concrete, plastics and other non-metallic substrates. Testing with the P.I.G is based on the standardized wedge cut procedure: The coating is cut through at a defined angle in such a way that the cut penetrates the substrate. The layer thickness (s) is calculated on the basis of the slope projection (b) of the cut face, determined using a measuring microscope, and the cutting angle, similarly, the individual layer thicknesses of multilayer systems can be ascertained.
Paint Inspection Gauge (P.I.G)
Paint inspection gauge which is suitable for use wherever conventional electro-magnetic measuring techniques are ineffective, namely for coatings on wood, concrete, plastics and other non-metallic substrates.
Relevant Standards: ASTM D 4138; AS 1580 Meth 408.1
Paint Inspection Gauge (P.I.G) - Ref: T01-700009
Total:
Each:
Each:
Delivery 1-2 weeks
- Relevant Standards: ASTM D 4138; AS 1580 Meth 408.1
- Exchangeable carbide tip with precision-ground angular cutting blade (comes with 4 cutters) No.1 Cutter: Measuring range: 20-2,800µm (Factor: 20µm) No.2 Cutter: Measuring range: 10-1,400µm (Factor: 10 µm) No.3 Cutter: Measuring range: 5-700µm (Factor: 5µm) No.4 Cutter: Measuring range: 2-2,80µm (Factor: 2µm)
- Measuring microscope with a magnification of 30 and a reticle(2.8mm with 1/140 division) which is also suitable for inspection tasks
- Two-wheel design, for increased stability and uniformity of cutting
- Battery compartment for 1.5 V battery block
- Combination of LED and fibre-optic light guide for optimum specimen illumination at low current consumption
- Measuring range (standard): 2~2800µm
- Power supply: 1 pc 1.5V battery
- Overall Size: 110×85×25mm,
- Weight: 0.5 KG
Paint Inspection Gauge