DuPont Impact TesterDuPont Impact Tester

DuPont Impact Tester

DuPont Impact Tester for testing the endurance of coated material, when impacted by a falling weight at specified points.

Relevant Standards: ASTM D 2794, JISK 5400, CNS 10756

Ref: T01-700160

DuPont Impact Tester - Ref: T01-700160

£1550
Total:
Each:

Delivery 1-2 weeks

The DuPont Impact Tester has been designed to test the endurance of coated material, when impacted by a falling weight at specified points. The purpose of the test is to see if test specimens can resist the effect of rapid impact testing. The principle of the test is that a coated test specimen is impacted by a falling weight, at a fixed height; thus checking the damage or deformation of the test specimen. It can also be used on paintings with coated materials. The same procedure is followed, using various impact heads or needles to drop freely onto the test specimen from a certain height. This is performed three times on the same test specimen, which is then left to stand for one hour. The test specimen is then checked for any cracking on the painting.

  • Relevant Standards: ASTM D 2794, JISK 5400, CNS 10756
  • Instrument scale Length: 50-500mm (grade : 50mm)
  • Mass of hammer: 300g, 500g, 1000g
  • Piercer specification: 1/2 1/4 1/8 1/16 3/16in
  • Notch diameter on the bolster block: 1/2 1/4 1/8 1/16 3/16in

No videos are available